|
 |
| |
As a pool owner you know by now that an unheated swimming
pool is only comfortable during the peak of the summer months. Most
swimmers feel comfortable at around 80° F and children require even higher temperatures to be able to swim any length of time without shivering.
If your pool is not being heated and is only useful for
a few months each year, it makes sense to invest in a solar heating system
to increase the usefulness of your investment in the pool and pool maintenance.
If you want the pool temperature to be higher than nature wants it to
be, you must heat it on virtually a continuous basis.
A Sun Ray Solar pool heating system will do just that. It
will collect the suns free energy and pour the collected heat into your
pool day after day, year after year, so you, your family and friends will
fully enjoy your swimming pool.
System performance:
The performance of your system is directly proportionate to the surface area of the solar
panels. The surface area is determined by the size of your pools geographical
location, and the panels orientation to the sun. In the sun belt area,
the requirement surface area is equal to 50% to 80% of the surface area
of the pool. More than a minimum requirement will increase the ability
of the system to heat your pool under marginal weather condition. A plastic
pool cover can be used to keep the heat collected by the solar system
from being lost during the colder nights.
It's The Real Thing: Sun Ray's Pool Panels are
metallic heat exchangers especially engineered to absorb solar energy
efficiently.
Better Performance: Sun Ray's metallic (copper tubes,
aluminum absorbers) Pool Panels absorb and transfer solar heat at a much
greater rate then plastic or rubber, the result is a better
performance.
Weather Resistant: Sun Ray's Metallic Solar Pool
panels withstand UV-radiation, hot or cold weather. The material will not
break down with prolong exposure to the sun. No plastic or rubber panels
will last as long.
Quality always costs less in the long run. That's why Sun Ray
Copper Pool Panels are the best choice.
|
| |
| |
| |
The Sun Ray pool heating system is adapted to your existing
circulation and pool filtration system. A large flow of filtered water
is circulated through the solar heat collector panels which are exposed
to solar energy and transfer the heat collected to your pool. An automatic
or manual valuing system is added to divert the water to your solar pool
collectors when heat is available.
Since the solar heating system is part of your pool circulation
and filtration system, your pump timer is set to operate during the sunny
hours of the day. Your Sun Ray pool heating system will free you from the
need to heat your pool by any other means during most of the year.
Maintenance: There is no special maintenance
required. A chlorine or bromine level at around 2 ppm and a pH of 7.7 are
good levels for swimming comfort and are perfectly compatible with Sun Ray
copper panels. Add chlorine directly to the surface of the pool to dilute
concentrated compound.
Freeze protection: It is good practice to install
the solar collectors above the water level of the pool and to allow the
collectors to completely drain during the night or when freeze conditions
occur. If the collectors must be installed below the water level of the
pool, a manual valving system must be installed to allow the proper
drainage during the cold season.
Your Sun Ray Solar Distributors are highly trained and carefully
selected independent solar professionals. Using Sun Ray Solar pool panels,
they can design and install a reliable high performance, cost-efficient
system to fit your individual needs and requirements.
For your nearest Sun Ray Solar Distributor call Sun Ray Solar at (619) 284-0844
or E-mail: info@sunraysolar.com
Click here to learn more about Sun Ray Copper Pool Panels
Click here for Installation Instructions for Sun Ray Pool Heating System |
| |
|
|
